🩷✂️Clothing overhead organizer transformation "Before/After"🧵🩷[ES/EN]
Published on HivePostify by @anne002 · Fri Aug 07 2026
.jpg)
Buenos días amigos creativos y costurer@s de esta bonita comunidad,hoy volví con los trabajos de costura que aunque son retos para mí estoy disfrutando al máximo de hacer,les quiero compartir el proceso de una transformación y renovación de un organizador aéreo de ropa.
> Good morning creative friends and sewers of this lovely community, today I'm back with sewing projects which, although challenging for me, I'm thoroughly enjoying. I want to share with you the process of transforming and renovating an overhead clothing organizer.
Este organizador tiene conmigo mucho tiempo así que ya la tela de malla que tenía anteriormente se le estaba desgastando y no servia ,le urgía un cambio,así que usaremos tela suave de lona en color fucsia para hacerlo y darle una bonita transformación,aquí les comparto el proceso que aunque tardó para mi hacerlo alrededor de 5 horas 🤭los resultados son increíbles.
> I've had this organizer for a long time, so the mesh fabric it had before was wearing out and was no longer usable; it desperately needed a change. So, we'll use soft fuchsia canvas fabric to make it and give it a beautiful transformation. Here I share the process, which, although it took me about 5 hours to do 🤭, the results are incredible.
---
.jpg)
Materiales: | Materials:
Tela de lona suave y resistente Aguja e hilo Máquina de coser (Aguja #16) Hojas de papel y lápiz para hacer el patrón Adorno en plateado, cintas decorativas,perlas,lo que gustes para decorar Argolla redonda de madera o metal Tijera
> Soft and durable canvas fabric > Needle and thread > Sewing machine (size 16 needle) > Paper and pencil for making the pattern > Silver embellishments, decorative ribbons, pearls, or anything you like for decoration > Round wooden or metal ring > Scissors
.jpg)
Pasos a seguir: | Steps to follow:
Paso 01 El primer paso que hice con el organizador fué desarmarlo completamente,quitarle las varillas que tenía alrededor y por supuesto cortar las piezas para usarlas como guía y hacer mi patrón para poder cortar la tela en la lona, usé un papel para calcar las piezas usé tres patrones uno con horificio , otro sin el,y el otro para la pieza que sostiene arriba el organizador,como la hoja no me alcanzaba procedí a empatar las y hacer mi patrón,luego empecé a cortar los moldes.
> Step 01 > The first step I took with the organizer was to completely disassemble it, remove the rods around it, and of course cut the pieces to use as a guide and make my pattern to cut the fabric on the canvas. I used paper to trace the pieces; I used three patterns: one with a hole, one without, and the other for the piece that holds the organizer up. Since the sheet wasn't big enough, I proceeded to join them together and make my pattern, then I started cutting the templates.
---
Paso 02 Seguí cortando mis piezas (Corté 3 piezas con horificio y 21 piezas sin horificio)una vez las tenía lista corté la pieza doble que sostiene el organizador ,ésta pieza es un rectángulo largo que doblaremos , después corté tiras de 3 cm de ancho para el sesgo que le colocaremos alrededor de cada módulo de organizador y sostener las varillas.
> Step 02 > I continued cutting my pieces (I cut 3 pieces with a hole and 21 pieces without a hole). Once I had them ready, I cut the double piece that holds the organizer. This piece is a long rectangle that we will fold. Then I cut 3 cm wide strips for the bias tape that we will place around each organizer module to hold the rods.
---
Paso 03 Ya en el siguiente paso procedí a coser mis piezas,algunas piezas como la tela no me alcanzó las empaté las que había empatado las empecé a armar parejas para que no quedara deforme el diseño del organizador en pocas palabras coloqué empate con empates,aquí ya estoy armando cada pieza ,debemos armar primero la de abajo ,todas son como especie de pirámide.
> Step 03 > In the next step, I proceeded to sew my pieces. Some pieces, like those where I didn't have enough fabric, I joined them together. The ones I had joined, I started assembling in pairs so that the organizer's design wouldn't be distorted. In short, I placed one piece with another. Here I am assembling each piece. We must assemble the bottom one first; they are all like a kind of pyramid.
---
Paso 04 Pasaremos a coser las tiras poco a poco y luego cosemos el sesgo alrededor del borde de los horificios que le hicimos a las piezas,luego armamos las piezas de arriba,esa pieza del horificio nos debe quedar en el frente ya que este nos permitirá insertar la mano una vez listo el organizador,coseremos con costura recta por el borde uniendo dos triángulos de 4 piezas cada uno ,osea cada módulo tiene 8 triángulos armados.
> Step 04 > We will proceed to sew the strips little by little and then sew the bias tape around the edge of the holes we made in the pieces. Then we assemble the top pieces. That piece with the hole should be on the front since this will allow us to insert our hand once the organizer is ready. We will sew with a straight stitch along the edge joining two triangles of 4 pieces each, meaning each module has 8 assembled triangles.
---
Paso 05 En cada módulo dejaremos una abertura arriba para colocar un sesgo delgado que permite sostener los módulos de abajo a los de arriba,luego coloco el sesgo por alrededor de cada uno e inserto las varillas ,luego coso la tira que sostiene el organizador la doblo la inserto en el primer módulo lo cosí a mano y luego para adornarlo le he cosido unos bonitos lazos en total hice tres que le coloqué en cada módulo para dar una apariencia mas hermosa.
> Step 05 > In each module, we will leave an opening at the top to place a thin bias tape that allows the modules below to be supported by the ones above. Then I place the bias tape around each one and insert the rods. Next, I sew the strip that holds the organizer, fold it, and insert it into the first module. I sewed it by hand, and then to decorate it, I sewed some pretty bows on it. In total, I made three, which I placed on each module to give it a more beautiful appearance.
---
.jpg)
Resultado: | Result:
Así nos queda los resultados finales de esta bonita transformación del organizador ,espero les haya gustado como quedó mi trabajo ,yo quedé enamorada y encantada de ver cómo cambió drásticamente.
> These are the final results of this beautiful transformation of the organizer. I hope you liked how my work turned out. I was thrilled and delighted to see how drastically it changed.
Si te ha gustado no olvides compartir con quién sepas que le guste este tipo de trabajo,les deseo bello día y nos vemos en otra confección ☺️🥰🧵.
> If you liked it, don't forget to share it with anyone you know who might enjoy this type of work. Have a beautiful day and see you in another project! ☺️🥰🧵
.jpg)
¡Hola!...Soy Annie Una chica que le apasiona el diseño,la costura las manualidades y crear cualquier cosa de mucho uso con mis manos,tengo como hobbie diseñar ropa,la música ,el maquillarme,la fotografía,la pintura y el dibujo,expresar mis ideas y sentimientos en un dibujo es algo que me gusta hacer,amo la naturaleza,un atardecer ,la playa y disfrutar con mis familiares de los buenos momentos de la vida.❤️
---
✨Creando las cosas con amor♥️ | ✨Creating things with love♥️
Edición:[Canva®](https://www.canva.com/es419/) y [InShot](https://inshot.com)
Imágenes:de mi autoria
Traductor:[Traductor de Google](https://translate.google.com?hl=es)
Dispositivo:TecnoSpark 8C/modelo 2022.
---
---
Tags: #spanish#transformation#needlework#sewing#diyhub#art#handmade